There are multiple ways to do it right and to achieve what you want. Here are two distinct ones:

1) Get a program called Roxio Toast 10 Titanium and click on create DVD. Then simply drag your files from left to right, follow the instructions and hit “Burn”. That’s it, it’s that easy if you can fork out $75.-. And the program can do much more than just that, check it out.

2) Save some money, have fun (maybe) and learn in the process.

- Hop on the terminal of you Mac and ensure that you have hdiutil. Type hdiutil info and you’ll know what version you have, which should be close to framework 283.

- Create an ISO which you can then burn to the DVD:  hdiutil makehybrid -udf -udf-volume-name DVD -o DVD Directory_of_DVD where DVD is the name of the iso file. This can take several minutes, depending on the length and size of your movie and the speed of your Mac.

- Mount the iso on your Mac by double clicking it and verify that it works as intended.

- Unmount it and burn it to DVD with Disk Utility or your favorite burner.

These are the five (four if you know which extension you want) components needed:

- libevent (requred library for memcached)

- memcached daemon

- libmemcached (required library for the php client)

- php extension (standard)

- php extension (PECL)

Now open your terminal and off we go:

Note: if you don’t want to install wget, you can alternatively use “curl -O”)

Installing libevent:

$ cd /tmp
$ wget http://www.monkey.org/~provos/libevent-1.4.13-stable.tar.gz (if you’re brave, you can try the 2.0 beta)
$ tar zxvf libevent-1.4.13-stable.tar.gz
$ ./configure
$ make
$ sudo make install

Installing memcached:

$ wget http://memcached.googlecode.com/files/memcached-1.4.1.tar.gz
$ tar xzvf memcached-1.4.1.tar.gz
$ cd memcached-1.4.1
$ ./configure
$ make
$ make test
$ sudo make install
$ memcached -d -P pidfile -l 127.0.0.1 (this will start the memcached daemon)
$ ps aux | grep ‘memcached’ (this should confirm that memcached is running and how much memory is assigned to it)

Installing libmemcached:

$ wget http://launchpad.net/libmemcached/1.0/0.34/+download/libmemcached-0.34.tar.gz
$ tar -zxvf libmemcached-0.34.tar.gz
$ cd libmemcached-0.34
$ ./configure
$ make
$ sudo make install

Installing PECL memcache extension:

$ cd /tmp
$ pecl download memcached
$ tar xzvf memcached-1.0.0.tgz
$ cd memcached-1.0.0
$ phpize
$ ./configure
$ make
$ sudo make install

Installing PHP memcache extension:

$ cd /tmp
$ wget http://pecl.php.net/get/memcache-2.2.4.tgz
$ tar -zxvf memcache-2.2.4.tgz
$ cd memcache-2.2.4
$ phpize &&
$ ./configure
$ make
$ sudo make install

Once all the steps are completed successfully, ensure that the extension directory is specified as the same as the output of the terminal after the extensions installed. Otherwise correct in php.ini.

Also add the line(s) to load the extension(s) in the php.ini file, in the extension section:

extension=memcached.so
extension=memcache.so

And finally restart apache:
$ sudo apachectl restart

And verify in phpinfo that memcache(d) is loaded and working.

You will need an appropriately sized external drive or USB Flash Drive, as the Snow Leopard install DVD’s size is about 6.2 gigabytes. An 8GB USB stick like the SanDisk Cruzer 8GB is the perfect choice.

Now let’s plug in that USB stick and get started.

1. Start up Disk Utility and select your Flash Drive from the left side pane.

2. Select the Erase tab and set Format to Mac OS Extended (Journaled). It should be the first choice in the list. Set Name to Snow Leopard or OS X Install so you can easily keep track of it. Before you the Erase button, be sure that you copied any files or folders from the Flash Drive that you want to keep, as everything will get erased. You’ve been warned! Hit Erase.

3. After the Erase action has finished, we’re ready to move the installation files onto the stick. If you don’t already have the installation DVD inserted, do so. It should appear in the left side pane. Drag it’s image (Mac OS X Install DVD onto the source input field. Select your USB Flash Drive and drag it onto the Destination input field. Then hit Restore and wait for the process to finish. Be patient as it can take more than 20 minutes.

4. In case you try to install the OS now by clicking on the USB image, a warning may appear saying that you cannot install OS X from this volume. Ignore the message. Remove the installation DVD from the drive and restart your Mac with the USB plugged in. When your Mac boots up, press and hold the option/alt key until a menu with available drives appears. Select it and follow the prompts. At this point everything should proceed the same way as the regular DVD install.

1. If you don’t already have the mcrypt module (in /usr/lib), download the libmcrypt source code from sourceforge here. Then extract the downloaded file in a Terminal and move inside the created directory. (cd libmcrypt-2.5.8 in my case)

2. Execute the following lines in one command in your Terminal, if you have a 64bit version of Apache/PHP:

CFLAGS=”-arch x86_64″ \
CXXFLAGS=”-arch x86_64″ \
./configure –disable-posix-threads

(for 32 bit versions: ./configure –disable-posix-threads)

2. In your Terminal, run:

make

3. If no errors, in your Terminal run:

sudo make install

4. Download the PHP source code from PHP’s website here. Extract in a Terminal and move into the extracted directory.

5. In your Terminal, run the following lines in one command:

export MACOSX_DEPLOYMENT_TARGET=10.6 \
CFLAGS=”-arch x86_64″ \
CXXFLAGS=”-arch x86_64″

./configure –prefix=/usr/local/php5
–mandir=/usr/share/man
–infodir=/usr/share/info
–sysconfdir=/etc \
–with-config-file-path=/etc \
–with-zlib \
–with-zlib-dir=/usr \
–with-openssl \
–with-iconv=/usr \
–enable-exif \
–enable-ftp \
–enable-mbstring \
–enable-mbregex \
–with-mcrypt \
–enable-sockets \
–with-mysql=/usr/local/mysql \
–with-pdo-mysql=/usr/local/mysql \
–with-mysqli=/usr/local/mysql/bin/mysql_config \
–with-apxs2=/usr/sbin/apxs

6. Correct a bug in Makefile.

As a result of a bug in PHP 5.2.9 and 5.3.0, we’ll need to correct the file Makefile generated by the configure phase. Let’s add ‘-lresolv‘ at the end of the line that begins with ‘EXTRA_LIBS‘. Leave a space and add it like ” …   -lz -licucore -lm -lresolv to whatever is there already. Do not alter the exiting text, simply add it.

7. In your Terminal, run:

make

8. If no errors, run:

sudo make install

At this point, restart apache and check your configuration with phpinfo(). Look for mcrypt as it should appear as an enabled module.

1 – Download the installation image from MySQL website here. Then double-click to mount and open the disk image.

2 – Install MySQL Server by double clicking the package “mysql-5.1.*****.pkg” and follow the menu, accepting the default values, unless you want to change something and know exactly what you’re doing.

3 – Install MySQL Startup Item by double-clicking the package “MySQLStartupitem.pkg” and follow the menu.

4 – Install MySQL Preference Pane by double-clicking the file “MySQL.prefPane” and follow the menu. This item will simplify the management of your SQL Server. You can now use the “System Preferences” panel to start and stop the database server.

5 – Enable the php module in your apache config file. You might know that Snow Leopard already ships with Apache 2.2 and PHP 5.3, but it needs a couple of tweaks to make it work smoothly. So, open /etc/apache2/httpd.conf and search for “php5_module”. Remove the comment (#) in front of the line, save and close the file, then restart apache (sudo apachectl restart)

6 – Testing Apache/PHP. Let’s create an info file so we know what we got. Navigate to /Library/WebServer/Documents and create a file called phpinfo.php. Put the following line into the file, save and close. “<?php phpinfo(); ?>”. Now open your favorite browser and hit it (http://localhost/phpinfo.php). You should see a page like the one below, which shows you configuration details, modules enabled and other useful information.

7 – There is no php.ini out of the box (as you may have discovered by looking at the phpinfo page), but there is a sample file called “php.ini.default” which we’re going to use. Copy this file and save it as php.ini.

8 – Set the default time zone. As PHP 5.3 requires the timezone to be set, let’s do this inside php.ini, so we don’t have to worry about it anymore. You can always override it in your application’s bootstrap, if needed. Open /etc/php.ini and search for “[Date]“. Uncomment the line “date.timezone = ” and add your timezone. Check the php manual for acceptable values. (example: date.timezone = ‘America/Los Angeles’)

And that’s it. You should now have a fully functional LAMP stack with Apache, PHP and MySQL server.